

简体 English



 Language

en 中文

Military standard heat shrinkable sleeve

High temperature oil resistant heat shrinkable sleeve

Electronic Connection Heat Shrink Components

Double Wall Adhesive Heat Shrink Tubing

Single Wall Heat Shrink Tubing

Braided sleeve

Identification heat shrink tubing

Insulation sleeve

Home page

KBBS Waterproof Butt Solder Heat Shrink Ring

KBBS Waterproof Butt Solder Heat Shrink Ring

Basic performance: Material: transparent heat-shrinkable sealing sheath and intermediate low-temperature solder preform; Shrink ratio: 2:1; Continuous working temperature: -55℃～125℃.

Product Category:

Single Wall Heat Shrink Tubing

Workshop Equipment

Honor

Laboratory Equipment

 Product consultation telephone: 13926000236

 Inquiry

 Product

Product Details

Basic performance:

Material: transparent heat-shrinkable sealing sheath and intermediate low-temperature solder preform;
shrinkage ratio: 2:1;
start shrinkage temperature: 80°C;
complete shrinkage temperature: 155°C;
continuous working temperature: -55°C～125°C.

Features:

Clear insulating sleeves provide encapsulation, detectability, strain relief and insulation;
pre-soldered solder preforms built into the hermetic sheath provide a controlled soldering process;
seal rings built into both ends of the hermetic sheath provide temperature indication, only when When the surface to be connected reaches the correct soldering temperature, the ring will melt and show a clear color change, thereby ensuring a correct solder connection;
one-piece design, easy installation, and low installation cost;
optional pre-installed ground wires provide convenience and easy to install.

Application fields:

Electronics, automobiles, aviation and rail transportation;

Performance Standards:

Test items	Indicator requirements	testing method
Sealing sheath
Low Temperature Solder Preforms	155℃/complete melting	Heat gun heating
Insulation withstand voltage and breakdown voltage	2.5KV/60s without breakdown	ASTMD2671
volume resistivity	10¹²Ω·cm（min）	ASTMD876
water absorption	<0.1%	ISO2
Sealing ring softening point	100±5℃	ASTMDE8
Peel strength (PE)	40NB/cm	DIN30672
copper stability	no corrosion	ASTMD2671
Anti-fungal	≤2	ISO846
waterproof level	IP67	IP67

Specifications and dimensions (unit: mm):

product code	Product Size		Rubber rings, solder preforms	Applicable cable range		Rubber ring color marking
product code	Minimum inner diameter (ΦA)	Minimum length (L)	Minimum inner diameter (ΦA)	AWG	mm2
KBBS-01	1.7	26	1.7	24～26	0.25～0.34	White
KBBS-02	2.7	40	2.7	18～22	0.5～1.0	red
KBBS-03	4.5	40	4.5	14～16	1.5～2.5	blue
KBBS-04	6.0	40	6.0	10～12	4.0～6.0	yellow
KBBS-05	7.0	40	7.0	6.0～10	4.0～8.0	Ash
KBBS-06	9.0	40	9.0	4.0～10	6.0～14.0	blue
KBBS-07	10.7	40	10.7	6.0～10	6.0～14.0	blue
KBBS-08	13.0	46	13.0	4.0～8.0	8.0～22.0	blue