

简体 English



 Language

en 中文

Military standard heat shrinkable sleeve

High temperature oil resistant heat shrinkable sleeve

Electronic Connection Heat Shrink Components

Double Wall Adhesive Heat Shrink Tubing

Single Wall Heat Shrink Tubing

Braided sleeve

Identification heat shrink tubing

Insulation sleeve

Home page

DWES Wire Harness Double Wall Heat Shrink Tubing

DWES Wire Harness Double Wall Heat Shrink Tubing

Basic performance: Material: rigid cross-linked polyolefin outer layer, hot-melt glue inner layer; Shrink ratio: 4:1; Continuous working temperature: -45℃～110℃.

Product Category:

Double Wall Adhesive Heat Shrink Tubing

Workshop Equipment

Honor

Laboratory Equipment

 Product consultation telephone: 13926000236

 Inquiry

 Product

Product Details

Basic performance:

Material: rigid cross-linked polyolefin outer layer, hot-melt glue inner layer;
shrinkage ratio: 4:1;
start shrinkage temperature: 70°C;
complete shrinkage temperature: 110°C;
continuous working temperature: -45°C～110°C.

Features:

The outer wall is transparent, which can inspect and identify the covered object;
semi-rigid, providing stress relief and anti-wear protection;
hot melt adhesive has a wide operating temperature range, and can bond multiple conductors of different materials;
effectively shields oil and water vapor , Protect the wiring harness from corrosion and water seepage;
the shrinkage ratio is large, and it can encapsulate irregular joints and components of different sizes.

Application fields:

Environmental sealing of wire harness connectors, terminals and components in the automotive industry;
insulation protection of various wire harnesses.

Performance Standards:

performance	Indicator requirements	testing method	typical value
Cutting force	13.6kg	ASTMD3032	≥14kg
Thermal shock (225°C, 4 hours)	no crack	ASTMD2671	no crack
Insulation withstand voltage and breakdown voltage	1KV/60s without breakdown	ASTMD2671	No breakdown
volume resistivity	10¹²Ω·cm（min）	ASTMD876	≥10¹⁴Ω·cm
Tensile Strength	≥10.4Mpa	ASTMD2671	≥12.5Mpa
elongation at break	≥200%	ASTMD2671	≥300%

Specifications and dimensions (unit: mm):

product code	before contraction	after full contraction			Package
product code	the inside diameter of	inner diameter	Minimum wall thickness	glue thickness	m/roll
DWES-3.0	3.0	1.00	1.20	0.80	200
DWES-4.5	4.5	1.10	1.20	0.80	100
DWES-6.0	6.0	1.20	2.00	1.50	100
DWES-8.0	8.0	1.50	2.00	1.50	50
DWES-10.0	10.0	2.00	2.10	1.50	50
DWES-12.0	12.0	2.50	2.10	1.50	50